- lit is a board that controls cabinet lights on 1st gen cabinets
- Controls spotlights, P1/P2 menu buttons, bass neons, arrow lights (if not using STAC boards)
- Connects to a PC running Windows/Linux via USB
- Does not require official hardware such as EXTIO or P2IO
- You will not be able to run Python2/573 PCBs without moving plugs back and forth as the lit uses plugs from the PCB/EXTIO
- Compatible with many games, may require some (easy) setup
- Some examples include ITGmania, OpenITG, notITG, StepMania 5
- See product page for more information and demo video
- Power off / unplug cabinet
- Disconnect Python2 and remove from cabinet (may be returned after lit install)
- Locate the cable labeled
PORT1-PYTHON2 that was connected to the Python2 and route it to the floor of the cab
a. This cable should be 8 wires on an 11 pin header